£2.30

Lake foam bodies 

This body shape was specially developed for fishing still waters and allows most of the float body to be well below the surface and thus much less affected by wind 

These bodies are made from closed cell foam. 

This is a “high tech” material stronger and lighter than balsa. 

This foam can be glued and painted with all the same materials as balsa including cellulose. 

Foam will never take on water.  Glue a 1mm glass stem through the body with about 1cm of stem above the body. 

Then glue a 1.5mm or 2mm hollow tip on to this piece of stem.

Use 1.5 or 2.0mm tips with a 1mm bore.

pack of 8

Product Code: LAKNUBXF61